Showing 1–16 of 94 results

  • Sale!

    BILTWELL – 6202-2016 – HANDLEBAR H2

    Original price was: $349.99.Current price is: $70.00.

    All welded joints are precision-mitered and TIG-welded Manufactured from 1″ OD .120″ wall seamless 4130 chromoly tubing All bends are created with internal mandrels on a CNC bender to reduce flat spots in the bends

  • Sale!

    BILTWELL – 6309-2013 – HANDLEBAR TRACKER HI

    Original price was: $294.99.Current price is: $73.75.

    Manufactured from 1″ OD 0.120?? wall seamless 4130 chromoly tubing All bends are created with internal mandrels on a CNC bender to reduce flat spots in the bends All welded joints are precision mitered and TIG welded If grip sets aren’t installed, bars will be 1-1/8″ shorter than listed These bars will not mount to…

  • Sale!

    Biltwell 1" Footpegs Biltwell 1" Footpegs Black

    Original price was: $74.95.Current price is: $22.49.

    Biltwell 1" FootpegsBiltwell 1" Footpegs Black A modern take on Bates’ rubber classic Injection-molded PVC sleeve with a 6061 T6 CNC-turned aluminum core Investment-cast chromoly clevises Available in black with an electroplated finish Sold in pairs NOTE: Will not fit driver’s position on 13-16 FXSB/SE, 11-13 FXS, 08-11 FXCW/C, 13-16 XL1200V/XL1200X/XL1200C models A modern take…

  • Sale!

    Biltwell 4" Round Utility Mirrors

    Original price was: $89.95.Current price is: $26.99.

    Biltwell 4" Round Utility Mirrors Precision die-cast aluminum construction with stainless-steel ball joint mounting hardware Tempered glass mirror Clamp-on mirrors include CNC-machined 6061-T6 aluminum P-clamp for mounting on handlebars Clever ball joint assembly inside the mirror perch can be reversed for right-side mounting Clamp-on mirrors sold each; mirrors with perch mount sold each or in…

  • Sale!

    Biltwell 7/8" Tracker Handlebars

    Original price was: $119.95.Current price is: $29.99.

    Biltwell 7/8" Tracker Handlebars 7/8″ o.d. X 0.120″ wall seamless 4130 chromoly tubing All bends are created with internal mandrels on a CNC bender to reduce flat spots in the bends All welded joints are precision mitered and TIG welded Product Note: Specification Details Color Varies (make selection above) Finish Varies (make selection above) Handlebar…

  • Sale!

    Biltwell Angled O/S Gauge Bracket Speed Clamps

    Original price was: $99.95.Current price is: $29.99.

    Biltwell Angled O/S Gauge Bracket Speed Clamps Offer a clean solution for installing a wide variety of select stock and aftermarket Harley-Davidson gauge brackets CNC-machined from 6061 billet aluminum for precision and style Reducer shims included to work with 1″ and 1-1/4″ riser/bar uprights Black electroplate and chrome finishes available Product Note: Specification Details Color…

  • Sale!

    BILTWELL BAG HANDLEBAR EXFIL-3

    Original price was: $114.99.Current price is: $28.75.

    Designed to fit motorcycles with tall risers or sissy bars, but can be mounted anywhere on the bike Use to store gloves, tools, phones or up to three 12-oz (EU: 354,88 ml) cans Water-resistant, UV-treated 500 Tarpaulin PVC MOLLE loop system in front of bag Interior organizing panels are removable to fit larger items Includes…

  • Sale!

    BILTWELL BAG MOTORCYCLE EXFIL-7

    Original price was: $114.99.Current price is: $28.75.

    Features a coated, weather-resistant nylon packcloth exterior with heavy-duty polyester thread at all joints and seams Double-thick exterior walls and lid construction with internal padding for protection and durability Mil-spec orange interior panels on main and secondary compartments for enhanced material search and recovery inside the bag One-inch-wide nylon modified MOLLE system on perimeter panels…

  • Sale!

    BILTWELL BAG MOTORCYCLE EXFIL11

    Original price was: $179.99.Current price is: $45.00.

    Biltwell’s answer to the ubiquitous motorcycle tank bag Padded main compartment holds up to 11 12-oz. (EU: 354,88 ml) cans Attaches with magnets that are strong enough to hold the bag in any condition and at high speeds, regardless of whether the bag is loaded or empty Multiple attachment points if you’d like to use…

  • Sale!

    BILTWELL BLACK RISER BUSHING

    Original price was: $69.99.Current price is: $21.00.

    Fit most stock and select aftermarket Harley-Davidson upper trees Replace rubber bushings for a more rigid interface between handlebars and bike, resulting in better handling CNC-machined 6061-T6 aluminum construction

  • Sale!

    BILTWELL BUNG SEAT HINGE GEN-3

    Original price was: $52.99.Current price is: $15.90.

    Investment-cast chromoly steel bung fits 1.5″ OD backbone tubes on stock and custom motorcycle frames Includes self-lubricating bronze pivot bushings to reduce binding, ensure tighter tolerances and provide smoother operation when paired with a Biltwell seat hinge Raw finish welds easily and takes spray can paint like a champ Mates to any generation or style…

  • Sale!

    BILTWELL CAST S/STEEL SEAT HINGE

    Original price was: $153.99.Current price is: $38.50.

    Investment-cast stainless steel seat hinge is rugged and beautiful Raw cast chromoly bung welds to the backbone of the bike’s frame to create a hinge for mounting solo seats on custom choppers Stainless steel seat bracket bolts securely to the weld-on bung with a recessed shoulder bolt to form a hinge on finished assembly Hand-polished…

  • Sale!

    BILTWELL CHROME RISER BUSHING

    Original price was: $69.99.Current price is: $21.00.

    Fit most stock and select aftermarket Harley-Davidson upper trees Replace rubber bushings for a more rigid interface between handlebars and bike, resulting in better handling CNC-machined 6061-T6 aluminum construction

  • Sale!

    BILTWELL DIAMOND SOLO SEAT

    Original price was: $164.99.Current price is: $41.25.

    Studs are 7″ center-to-center Heavy-gauge stamped steel pan with gently sloping rear kick for added support Stamped-in ridges on the pan increase stiffness and give the pan a clean, classic look with a matte black electroplated finish Covers are hand-stitched heavy-duty black vinyl Foam is approximately 1″ thick molded polyurethane

  • Sale!

    BILTWELL EXFIL SBR (04-20)

    Original price was: $279.99.Current price is: $70.00.

    TIG welded construction throughout 5/8″ O.D. (5 mm) steel rod stock for maximum strength and durability 5 mm thick laser CNC cut and hand deburred side plates CNC lathe turned mounting bungs accept supplied Allen cap hardware for easy mounting

  • Sale!

    BILTWELL EXFIL SBR (96-03)

    Original price was: $279.99.Current price is: $70.00.

    TIG welded construction throughout 5/8″ O.D. (5 mm) steel rod stock for maximum strength and durability 5 mm thick laser CNC cut and hand deburred side plates CNC lathe turned mounting bungs accept supplied Allen cap hardware for easy mounting